|
|
FDOT - Structures Design Office - Programs
Structures
Design Office -
Programs
NOTE - new default install location - C:\FDOT Structures\Programs.
New releases of FDOT programs starting 1/1/2011 will have the above new
install location.
No warranty, expressed or implied, is made by the
Florida Department of Transportation as to the accuracy and functioning
of any programs or the results they produce, nor shall the fact of
distribution constitute any such warranty, and no responsibility is
assumed by the Florida Department of Transportation in any connection
therewith.
By downloading any programs, you are
agreeing to the above disclaimer.
The Structures Design Office will only support those
persons using this software in connection with Florida DOT related
business.
Structural Engineering/Design Programs
All Mathcad programs are Mathcad 14.0 M030
and Mathcad 15 compatible.
If there are questions about Structural programs, please contact
charlie.harvey@dot.state.fl.us
.
For Mathcad problems, view our
Mathcad
Frequently Asked Questions Page and
visit Mathcad at www.mathcad.com
.
Date
Size |
Program and Description |
| |
Atlas program is a
design and analysis program for dual & single cable supported concrete strain
pole traffic signal light systems in accordance with the 5th Edition AASHTO
Signs, Lights and Signals Specification and is available from the University of Florida Bridge
Software Institute.
See Index 17727 notice. |
1/18/12
1.8mb |
Beam Stability v1.03, is a Mathcad 14
program that
evaluates the construction stability of braced and un-braced simple
span pretensioned beams (uniform shapes: Florida-I, AASHTO,
and Bulb-T) in accordance with AASHTO LRFD and Guide Design
Specifications for Bridge Temporary Works. |
2/14/11
3.0mb
|
Biaxial
Column, v3.0, is a Mathcad 14 program that analyzes arbitrary reinforced or
prestressed concrete shapes providing the 3D interaction
diagram.
Note: Java required.
Install both 32-bit and 64-bit Java from the
Java download
website. |
|
Brufem is a program that
performs automated finite element modeling, analysis, and load
rating of highway bridges using a complete 3-D model and is available from the University of Florida Bridge
Software Institute. |
3/2/07
1.4mb |
Cantilever Overhead Sign
Program, v5.1, is used to design and analyze steel cantilever sign
truss structures and their foundations in accordance with
the 1994 AASHTO Signs, Lights and Signals Specification. See
2001 AASHTO windspeed notice. |
1/25/12
2.1mb |
Drilled
Shaft Design for Sign and Signal Structures, v2.03, is a
Mathcad 14 program that analyzes overturning and torsion in drilled shaft foundations
constructed in sand or clay. |
| |
FB-Deep
is a program used to estimate
the static axial capacity of drilled shafts and driven piles and
is supported
and available from the University of Florida Bridge
Software Institute |
|
|
FB-MultiPier is a nonlinear
finite element analysis program for analyzing bridge pier structures and
is supported and available from the
University of Florida Bridge
Software Institute. |
| 5/1/07 2.4mb |
High Mast,
v2.0, is a Mathcad 13 program that designs highmast light
poles in accordance with the 5th Edition AASHTO Signs, Lights and Signals
Specification. |
5/3/11
4.2mb |
LRFD Box Culvert Program,
v3.2, is a Mathcad 14 program that designs concrete box
culverts, wingwalls, headwalls, and cutoff walls in accordance with
the AASHTO LRFD Bridge Specification. |
2/16/11
2.5mb
|
LRFD Live Load
Generator, v3.0, is a Mathcad 14 program that calculates live loads for truck, truck
train, lane, partial lane, and permit loads in accordance with the AASHTO LRFD
Bridge Specification. |
8/17/11
5.8mb |
LRFD
Prestressed Beam Program, v3.3, is a Mathcad 14 program
that designs simple span prestressed beams (Florida-I, AASHTO,
Florida Bulb-T, Florida-U,
Florida Double-T, Flat Slab, Inverted-T) in accordance with the AASHTO LRFD
Bridge Specification. |
10/26/11
2.3mb |
LRFD Retaining Wall
Program, v3.1, is a Mathcad 14 program that analyzes and designs cast-in-place
retaining walls in accordance with the AASHTO LRFD Bridge
Specification. |
10/24/07
2.3mb |
MastArm Program, v4.01, is
a Mathcad 14 program that designs cantilever signal structures in
accordance with the 1994 AASHTO Signs, Lights and Signals Specification.
Included are Standard Mastarm B & C input files. |
5/1/08
2.5mb |
MastArm Program, v4.3, is
a Mathcad 14 program that designs cantilever signal
structures in accordance with the 5th Edition AASHTO Signs, Lights and
Signals Specification.
Included are Standard Mastarm D, E & F input files. |
1/24/11
1.1mb |
Multi-Post Sign Program, v4.01,
designs
ground signs in accordance with the 5th Edition AASHTO Signs, Lights and
Signals
Specification. |
1/24/11
1.3mb |
Multi-Post 2001 Sign Program, v1.21,
is a Mathcad 14 program that designs ground signs in
accordance with the 5th Edition AASHTO Signs, Lights and Signals
Specification. |
| 9/12/11
7.2mb |
Pile
Bent Program, v1.71, is a Mathcad 14 program that analyzes fixed and pinned pile bents,
including lateral loads. |
9/30/08
1.2mb |
Rectangular
Spread Footing Program, v1.0, is a Mathcad 14 program that analyzes
rectangular spread footings for sign and signal structures in accordance with the AASHTO
Standard Bridge Specification. |
1/24/11
1.6mb
|
Section
Properties Program, v2.03, uses coordinate input to calculate
section properties of any geometric shape.
Note: Java required.
Install both 32-bit and 64-bit Java from the
Java download
website. |
3/1/07
1.7mb |
Span
Overhead Sign Program, v5.1, is used to design and analyze steel
span sign
truss structures and their foundations in accordance with
the 1994 AASHTO Signs, Lights and Signals Specification. See
2001 AASHTO windspeed notice. |
12/3/09
2.0mb |
Strain v3.0, is a
Mathcad 14 program that designs concrete and steel strain poles in
accordance with the 5th Edition AASHTO Signs, Lights and Signals Specification and works in conjunction
with Design Standard Index 17725 and 17723.
See Index 17727 notice. |
10/12/07
11.4mb |
Vessel
Impact Analysis, v3.1, is a Mathcad 13 program that
performs a vessel impact risk analysis in accordance with the AASHTO
LRFD Bridge Specification. |
Structural Engineering
Programs Archive
Engineering Tools
Geotechnical Programs
CADD Software and Resources
|
|
