|
PLEASE
NOTE:
The Florida Department of Transportation has
revised the Florida Intersection Design
Guide (FIDG) to provide designers with a
handbook, to be used as guidance,
for new construction and major
reconstruction of at-grade intersections on
the State Highway System. At this time, the
FIDG is only available in electronic .PDF format
on this website.
No hardcopies will be
available.
The information contained in the FIDG is
based on the Plans Preparation Manual,
Design Standards, MUTCD, and other
referenced documents. The current forms of
these documents (as of the publication date
unless otherwise noted) were used in the
revision of the FIDG, however, if there is
ever a conflict between the FIDG and any
approved/adopted criteria or standards, then
the approved/adopted criteria or standards
shall govern.
Our Office is now working toward the 2012
version of the guide, due for posting later
on in the year. This new version will have
advanced information regarding Round-Abouts
and the Highway Safety Manual.
All FIDG users
must register their e-mail addresses in this
contact database, and select the Florida
Intersection Design Guide as an area of
interest in order to receive future update
notices, design memos, or other important
information concerning the Department's
design manuals used. Users can
register at the following link:
http://www2.dot.state.fl.us/contactmanagement/
If you should have any questions, comments
or suggestions regarding the FIDG, you can contact
any of the following individuals:
|
