EMERGENCY INFORMATION FDOT Emergency Travel Alert: For information on the current situation, please visit the following page - Alerts.

Engineering/CADD System Office

Engineering/CADD System Office / Scheduled Webinars

Live On-Line Training Sessions

Picture of a Florida Roadway

The Engineering / CADD Systems Office (ECSO) offers monthly and weekly GOTO Webinars, generally held from 9:00am to 11:00am (Eastern Daylight Time), addressing the hottest topics and most frequently asked questions.

The FDOT Contact Management system at: FDOT Contact Management is available for participant to sign up for email alerts as the Webinars are scheduled. For “How to…” assistance select How to use FDOT Contact Management help document or FDOT Contact Mailer webinar.

Future topic suggestions are more than welcome! Please send to: Jimmie Prow.

Participants may obtain the required session information and links to join meetings from the Webinar Schedule table below just by clicking on the links provided. Don’t forget to check for any attached resource documents to review!

Feel free to send any comments, suggestions, and questions to ecso.support@dot.state.fl.us.

Webinar Schedule

This is a list of upcoming webinar sessions. Please register early and remember to login at least 15 minutes prior to the webinar to ensure a timely session.


Category Title Date Description Time Presenter
FDOT Delivery and Contact Management FDOT Digital Delivery Part 3 of 3 01/06/2015 This webinar will focus on other aspects of Digital Delivery other than the plan set; What to do with JPA’s, How to include Specifications and TSP’s, What to do with computation books, etc. Future uses for digital signature will be addressed as well as questions from the previous webinar. 9:00 AM - 10:00 AM EST Quinton Tillman
FDOT MicroStation ***NO WEBINAR*** 12/24/2014 Christmas Holiday - -
FDOT MicroStation ***NO WEBINAR*** 12/31/2014 New Years Holiday - -
FDOT MicroStation FDOT Roadway Design & 3D Modeling (Ch 5) - Template Design (3 of 3) 01/07/2015 A continuation of the Template Design Session for New Open Roads Technology SS3 and Experienced GEOPAK Corridor Modeling users; this session will cover more advanced Create Template dialog. Learn common approach techniques for planning your templates along a corridor. Learn to build smarter, decision based templates that save time and repetitious template edits on your corridor projects in FDOTSS3.

This is Week 6 of a 10 week webinar series covering the New! "FDOT Roadway Design & 3D Modeling" training manual.
9:00 AM - 10:00 AM EST Vern Danforth
FDOT MicroStation FDOT Plan Development Workflow - Ch 2 & 3 Key Sheet &... 01/14/2015 This session will introduce how to create Key Sheets and Typical Sections, what new Workflows are available and the new automated Key Sheet Index process in FDOTSS3.

This is Week 1 of a 4 week webinar series covering the New! "FDOT Plan Development Workflow" training manual.
9:00 AM - 10:00 AM EST Christi Holmes
FDOT MicroStation FDOT Plan Development Workflow - Ch 4 & 5 Plan-Profile Sheets,... 01/21/2015 This session will cover creating Plan and Profile Sheets in FDOTSS3. The discussion will include how to: export Alignments and Profiles created in FDOTSS3 to a GPK file, create the General Notes Sheet using Linked Data Manager, and create a Project Layout Sheet.

This is Week 2 of a 4 week webinar series covering the New! "FDOT Plan Development Workflow" training manual.
9:00 AM - 10:00 AM EST Christi Holmes
FDOT MicroStation FDOT Roadway Design & 3D Modeling - Ch 6 & 7 Basic Corridor Models &... 01/28/2015 This session will introduce New Open Roads Technology SS3 Corridor Modeling tools. Learn how the Horizontal and Vertical Geometry tools, Civil Terrain Model, Plan View elements, and Templates are utilized to build virtual Roadway 3D Models. Then open a Dynamic View within the file to see a Cross Section at any location along the new corridor or across the 3D Model.

This is Week 7 of a 10 week webinar series covering the New! "FDOT Roadway Design & 3D Modeling" training manual.
9:00 AM - 10:00 AM EST Vern Danforth
FDOT MicroStation FDOT Roadway Design & 3D Modeling - Ch 8 Superelevation 02/04/2015 In this session, required superelevation is determined from a predefined FDOT Rule File and is assigned to a Corridor based on the lanes. The results will be reviewed in the Cross Section View, the Table Editor, and/or Reports generated in the Civil Report Browser.

This is Week 8 of a 10 week webinar series covering the New! "FDOT Roadway Design & 3D Modeling" training manual.
9:00 AM - 10:00 AM EST Vern Danforth
FDOT MicroStation FDOT Plan Development Workflow - Ch 6 Cross Sections & Sheets 02/11/2015 The Cross Sections workflow has been enhanced! In this session the user will learn how to completely layout Cross Section sheets with all the new tools. The course will include the new Cross Section cell layout tools, labeling tools, and will introduce a new method of calculating Earthwork. The old tools are not forgotten and will be covered as well, such as, Borehole Navigator, Ancillary Features and Sheet Layout.

This is Week 3 of a 4 week webinar series covering the New! "FDOT Plan Development Workflow" training manual.
9:00 AM - 10:00 AM EST Christi Holmes
FDOT MicroStation FDOT Plan Development Workflow - Ch 7, 8, & 9 SWPPP Plans,... 02/18/2015 This session will cover how to create SWPPP Sheets, the Traffic Control Plans using Civil Features, as well as, the Utility Adjustment Sheets in FDOTSS3.

This is Week 4 of a 4 week webinar series covering the New! "FDOT Plan Development Workflow" training manual.
9:00 AM - 10:00 AM EST Christi Holmes
FDOT MicroStation FDOT Roadway Design & 3D Modeling - Ch 9 Detail Modeling 02/25/2015 This session will cover how Bentley’s Civil Tools are used to complete the detail modeling at intersections or other areas that are not part of the Corridor.

This is Week 9 of a 10 week webinar series covering the New! "FDOT Roadway Design & 3D Modeling" training manual.
9:00 AM - 10:00 AM EST Vern Danforth
FDOT MicroStation FDOT Roadway Design & 3D Modeling - Ch 10 3D Construction... 03/04/2015 This session will cover the proposed Delivery requirements for 3D Projects. It will also show how each file can be extracted from files generated during the 3D Design process.

This is Week 10 of a 10 week webinar series covering the New! "FDOT Roadway Design & 3D Modeling" training manual.
9:00 AM - 10:00 AM EST Vern Danforth
***NOTICE*** There are no Autodesk Webinars scheduled at this time. ----- ----- ----- ----- -----