EMERGENCY INFORMATION FDOT Emergency Travel Alert: For information on the current situation, please visit the following page - Alerts.

Engineering/CADD System Office

Engineering/CADD System Office / Posted Webinars

Posted Training Sessions

Picture of a Florida Roadway

The Engineering / CADD Systems Office (ECSO) provides a listed of webinar training sessions previously recorded, addressing the hottest topics and most frequently asked questions.

Feel free to send any comments, suggestions, and questions to ecso.support@dot.state.fl.us. To suggest topics for future webinar sessions contact: Jimmie Prow.

Note: We recommend using Internet Explorer 9.0 (or greater) to have the best experience viewing these webinars.

FDOT MicroStation

This is a list of recorded FDOT MicroStation webinar sessions made available by the Engineering CADD System Office.

Category Title Description Size Duration Pres. Date Presenter
FDOT GEOPAK Corridor Modeling Tips and Tricks of GEOPAK Corridor Modeling Actually... there are no tricks! There are only tips of do’s and don’ts based on our experiences with the many FDOT projects that we have supported over the past few years. Come join us for these valuable "Nuggets of Knowledge" that will definitely help you in the world of Corridor Modeling. 242 MB 1:04:36 12/04/2013 Vern Danforth
FDOT GEOPAK Corridor Modeling Modeling Driveways in GEOPAK Corridor Modeling
Demonstration of GEOPAK Corridor Modeler driveway templates to assist our users in the design and modeling of urban type driveways for plan cross sections. 74 MB 0:10:00 12/04/2013 Vern Danforth
FDOT GEOPAK Corridor Modeling Viewing and Animations Tips for a GEOPAK Corridor Model
Learn how to master the manipulation your model with the Drive Through, Fly Through, Walk tools and how to set up a quick animation movie of your project. Your co-workers will be impressed! 229 MB 1:09:15 10/30/2013 Vern Danforth
FDOT GEOPAK Corridor Modeling GEOPAK Corridor Modeler Boot Camp GEOPAK training sessions delivered by Vern Danforth. - - 09/16-18/2013 Vern Danforth
FDOT GEOPAK Corridor Modeling Rollover in Roadway Designer Applying FDOT Shoulder Rollover in Roadway Designer. 64.7 MB 0:58:29 05/11/2012 Vern Danforth
FDOT GEOPAK Corridor Modeling Basic - 3D Design Find out the effective use of Corridor Modeling on FDOT projects by sharing ECSO experience on how to ease the transition to Corridor Modeling, how to START a project, and to see the many added benefits of creating a 3D model to provide a better quality design. 67.1 MB 0:42:12 05/01/2013 Jimmie Prow
FDOT GEOPAK Corridor Modeling Cross Sections and More This Webinar will demonstrate how cross sections can be generated from GEOPAK Corridor Modeling along pattern lines with the existing ground and integrated with Project Manager, Existing Features criteria, Ancillary features, Earthwork, Labeling and Final Cross Section Sheets. 47.7 MB 0:43:50 01/12/2011 Vern Danforth
FDOT GEOPAK Corridor Modeling Cross Slope Evaluation This webinar will show how to use Corridor Modeling tools for evaluating the cross slope of a DTM surface between any two longitudinal lines at a specified interval. For example: What is the existing ground slope between two lane lines, every 100 feet. 87.1 MB 0:56:29 02/13/2013 Brad Eiler
FDOT GEOPAK Corridor Modeling Designer Collaboration This webinar addresses how to manage a project design when multiple designers/engineers need to be working on modeling at the same time using Corridor Modeling, including Project data management, Roadway Designer target aliasing & Corridor referencing. 65 MB 1:07:49 02/06/2013 Vern Danforth
FDOT GEOPAK Corridor Modeling End Conditions Pt.1 This discussion will focus on how to add, edit and test End condition components on templates using the FDOT Template library to meet FDOT project design standard criteria. 72.6 MB 1:00:06 11/06/2012 Vern Danforth
FDOT GEOPAK Corridor Modeling End Conditions Pt.2 This discussion will focus on how to add, edit and test End condition components on templates using the FDOT Template library to meet FDOT project design standard criteria. 95.8 MB 1:10:22 11/09/2012 Vern Danforth
FDOT GEOPAK Corridor Modeling Special SE Webinar video about Special SE. 11 MB 0:05:32 01/25/2012 Vern Danforth
FDOT GEOPAK Corridor Modeling End Conditions Advanced Add, edit & test End condition components on templates using the FDOT Template library to meet FDOT design standards! This session will begin with the basic approach to end conditions and transition to more advanced/complex methods. 109 MB 1:05:31 05/29/2013 Vern Danforth
FDOT GEOPAK Corridor Modeling FDOT Templates The Engineering CADD Systems Office (ECSO) has developed an extensive library of graphical roadway design components for use on FDOT Corridor Modeling projects. This session will show how to find & configure the components for project requirements. 116 MB 1:06:55 05/22/2013 Brad Eiler
FDOT GEOPAK Corridor Modeling Getting Started Take the steps necessary to set up a project for use in GEOPAK Corridor Modeling! This will include planning for practical project data management, setting preferences, importing a TIN\DTM, importing geometry, and importing plan graphics. 35.3 MB 0:26:07 05/08/2013 Christi Holmes
FDOT GEOPAK Corridor Modeling Importing Graphics Webinar video about Importing Graphics. 64.7 MB 0:58:29 12/15/2011 Vern Danforth
FDOT GEOPAK Corridor Modeling Milling and Resurfacing Learn how to set up and design a RRR project in the Corridor Modeling environment in this webinar session. 82.6 MB 1:03:45 11/07/2012 Vern Danforth
FDOT GEOPAK Corridor Modeling Milling & Resurfacing Advanced Come discover the process of using a complete set of tools for evaluation, analysis and correction of existing roadway cross slopes on TIN surfaces and design modeling capabilities for milling, resurfacing, and overlay projects. 114 MB 0:55:11 07/17/2013 Vern Danforth
FDOT GEOPAK Corridor Modeling Parametric Constraints, Point Controls And Superelevations Advanced Come discover the process of defining, editing, and applying component constraint labels (i.e. parametric constraints) and geometry controlled points and superelevation in Roadway Designer. 121 MB 1:06:00 06/05/2013 Vern Danforth
FDOT GEOPAK Corridor Modeling Intersection Design Advanced Look more in depth into the basic Intersection Design Workflows utilizing GEOPAK’s Roadway Designer Tool working with FDOT components & templates! GEOPAK Corridor Modeling can be used to model proposed at grade intersections along a project. 132 MB 1:13:14 07/03/2013 Brad Eiler
FDOT GEOPAK Corridor Modeling Gore Design Advanced Look more in depth into the basic Gore Design Workflows utilizing GEOPAK’s Roadway Designer Tool working with FDOT components and templates. Utilizing GEOPAK’s Roadway Designer can make a ramp gore more stream line & an easier solid workflow. 148 MB 1:10:38 07/10/2013 Brad Eiler
FDOT GEOPAK Corridor Modeling Roadway Designer Discover the Roadway Designer workflow & tools at an easy & productive pace! This session includes: typical sections template application, superelevation, point controls, end conditions, creating 3D DTMs, & how to walk, drive or fly along the project model. 132 MB 1:13:00 05/15/2013 Vern Danforth
FDOT GEOPAK Corridor Modeling Round About Design Webinar video about Round About Design. 72.9 MB 0:59:29 05/07/2013 Vern Danforth
FDOT GEOPAK Corridor Modeling Course Guide
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 1 Pt. 1 Webinar video about FDOT Corridor Modeling Course Guide 1 Part 1. 16.3 MB 0:19:21 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 1 Pt. 2 Webinar video about FDOT Corridor Modeling Course Guide 1 Part 2. 33.9 MB 0:40:48 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 1 Pt. 3 Webinar video about FDOT Corridor Modeling Course Guide 1 Part 3. 32.8 MB 0:38:23 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 1 Pt. 4 Webinar video about FDOT Corridor Modeling Course Guide 1 Part 4. 54.8 MB 0:55:30 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 1 Pt. 5 Webinar video about FDOT Corridor Modeling Course Guide 1 Part 5. 36 MB 0:45:44 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 1 Pt. 6 Webinar video about FDOT Corridor Modeling Course Guide 1 Part 6. 28 MB 0:29:18 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 1 Pt. 7 Webinar video about FDOT Corridor Modeling Course Guide 1 Part 7. 51.7 MB 0:45:40 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 2 Pt. 1 Webinar video about FDOT Corridor Modeling Course Guide 2 Part 1. 25.2 MB 0:37:20 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 2 Pt. 2 Webinar video about FDOT Corridor Modeling Course Guide 2 Part 2. 30 MB 0:37:20 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 2 Pt. 3 Webinar video about FDOT Corridor Modeling Course Guide 2 Part 3. 32.2 MB 0:40:07 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 2 Pt. 4 Webinar video about FDOT Corridor Modeling Course Guide 2 Part 4. 25.6 MB 0:30:01 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 2 Pt. 5 Webinar video about FDOT Corridor Modeling Course Guide 2 Part 5. 44.3 MB 0:56:04 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 3 Pt. 1 Webinar video about FDOT Corridor Modeling Course Guide 3 Part 1. 38.5 MB 0:46:14 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 3 Pt. 2 Webinar video about FDOT Corridor Modeling Course Guide 3 Part 2. 30.4 MB 0:30:00 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 3 Pt. 3 Webinar video about FDOT Corridor Modeling Course Guide 3 Part 3. 21.9 MB 0:22:52 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 3 Pt. 4 Webinar video about FDOT Corridor Modeling Course Guide 3 Part 4. 60 MB 0:51:14 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic Corridor Modeling Course Guide 3 Pt. 5 Webinar video about FDOT Corridor Modeling Course Guide 3 Part 5. 61.2 MB 0:46:21 05/10/2012 Alvie Griffeth
FDOT GEOPAK Corridor Modeling WMV graphic FDOT Cross Sections Labeler Webinar video about FDOT Cross Sections Labeler. 52 MB 0:51:01 08/21/2011 Brad Eiler
FDOT GEOPAK Corridor Modeling WMV graphic Sidewalk Only Projects Webinar video about Webinar video about Sidewalk Only Projects - Corridor Modeling. 64.7 MB 0:59:32 08/06/2011 Vern Danforth
FDOT Cross Section Criteria Cross Section Tips And Tricks Anything to help make cross sections a little easier is good . . . Right? Join us to learn a few things from tool settings to VBA’s, along with some insight to how it all works. 52.8 MB 1:07:33 02/27/2013 Denise Broom
FDOT Cross Section Criteria Adhoc Attribute Manager Tool


Webinar video about Adhoc Attribute Manager Tool. 51.6 MB 53:39:00 04/12/2011 Denise Broom
FDOT Cross Section Criteria Cross Sections through Adhocs (Shoulders) Webinar video about Cross Sections through Adhocs (Shoulders). 84.6 MB 1:11:28 04/19/2011 Denise Broom
FDOT Cross Section Criteria Pavement Adhocs Webinar video about Pavement Adhocs. 78.7 MB 1:06:40 04/12/2011 Denise Broom
FDOT Cross Section Criteria Re-definable Variables



Webinar video about Re-definable Variables. 57.2 MB 1:06:17 04/12/2011 Denise Broom
FDOT Cross Section Criteria Automated Super-elevation Shape Tool Webinar video about Automated Super-elevation Shape Tool. 59.9 MB 1:02:18 04/12/2011 Denise Broom
FDOT Cross Section Criteria Criteria - Introduction to new criteria files added back to FDOT software This video covers how to use individual criteria files that are once again being delivered with the FDOT software. 65.4 MB 1:02:58 04/29/2011 Denise Broom
FDOT Cross Section Criteria Sidewalk Only Projects - Criteria This webinar presents on how should cross sections be created for sidewalk only projects using the FDOT Criteria. 64.7 MB 1:05:25 08/26/2011 Denise Broom
FDOT Cross Section Criteria Criteria Update - Milling and Overlay Webinar video about Criteria Update - Milling and Overlay. 17.9 MB 0:28:34 07/25/2011 Denise Broom
FDOT Cross Section Criteria Shape Creation Basics



This video covers the basics of super elevation shapes. What are they used for? How are they created and How does the criteria use them? 51.7 MB 1:02:49 03/10/2011 Denise Broom
FDOT Digital Delivery Introduction to Digital Delivery

This webinar will contrast Streamlined Electronic Delivery with the current Classical Electronic Delivery and discuss the changes to the process with updates to the CADD Production Criteria Handbook & the Electronic Delivery software applications used. 68.5 MB 0:55:35 03/06/2013 Bruce Dana
FDOT Digital Delivery Digital Delivery Project Structure & Standards This webinar will cover recently published and developing standards on digital delivery. Specific items to be discussed are file naming conventions, revisions, newly created “Signature Sheet” and the digital signature appearance. 51.5 MB 0:27:42 08/07/2013 Quinton Tillman
FDOT Digital Delivery Obtain and Trust a Digital Certificate
This video shows how FDOT employees will obtain and install a Digital Certificate, however portions of this video will benefit consultants who will need to obtain their own Digital Certificate (consultants should watch the video after time mark 0:04:15). 30.7 MB 0:12:28 11/04/2013 Quinton Tillman
FDOT General WMV graphic Welcome to the New FDOTSS3

See what has changed in FDOT SS3 user interface! There are new Task Workflows, the FDOT Menus have been reorganized, new context (right click) menus, Function Key menus, cell web pages, a new Help page and a Clear Crash Application available to make accessing key tools easier. 241 MB 0:45:49 10/29/2014 Christi Holmes
FDOT General WMV graphic CM Series (Pt. 1 of 3) - Site Integration

This is the beginning of a series of three webinars on customizing the FDOT workspace. It will lay the groundwork be explaining how the FDOT Workspace integrates with MicroStation. You will also see how the FDOT workspace can be easily customized to include your site specific resources like cells, text styles, project structure and such. 142 MB 1:14:24 07/16/2014 Jimmie Prow
FDOT General WMV graphic CM Series (Pt. 2 of 3) - Custom U. I.



In the second part of the CADD Manager's Series we will explore customizing the user interface. This will include creating custom tool boxes, adding right-click functionality, and modifying the Task menu. 305 MB 1:03:29 07/23/2014 Jimmie Prow
FDOT General WMV graphic CM Series (Pt. 3 of 3) - Printing



Part three of the CADD Manager’s Series discusses Printing related customization. See how to configure site specific print drivers, pen tables and Print styles for an efficient end user interaction. 350 MB 1:09:14 07/30/2014 Jimmie Prow
FDOT General Annotation Scale for ROW Mapping
This webinar will introduce annotation scale concepts for right of way mapping due to the implementation of annotation scale by FDOT Roadway Design. 114 MB 0:43:46 05/14/2014 John Hazlip
FDOT General Working With Annotation Scale - Just Do It! Join us to learn how to implement annotation scale into new and existing plans. 115 MB 0:42:18 10/09/2013 Christi Holmes
FDOT General Importing & Working With Shape File Data Come experience using MicroStation & Bentley Map shape file tools, include attaching & importing Shape Files. Learn single versus multiple shape file import, control settings, analyzing data within Data Browser, & re-projecting file data into other coordinate systems. 68.7 MB 1:08:06 03/13/2013 Alvie Griffeth
FDOT General FDOT Mailer Contact Management
This quick clip demonstrates how to sign up for the FDOT Mailer Contacts Database. Sign up for the FDOT Mailer to receive information regarding upcoming webinars, training opportunity and other topics of interest. 3.20 MB 0:03:44 02/13/2008 Matt Sexton
FDOT General New! MicroStation Tips And Tricks
The title says it all. This webinar will show a variety of Tips and Tricks that you may find helpful in the day-to-day use of MicroStation. Hopefully you will find something that makes your job just a little easier. 54.6 MB 0:57:03 02/20/2013 Jimmie Prow
FDOT General Geotech With Excel and Access Webinar video about Geotech With Excel and Access. 3.16 MB 0:03:44 02/25/2008 Matt Sexton
FDOT General Google Earth with MicroStation
Webinar video about Google Earth with MicroStation.


66.3 MB 1:03:48 01/11/2012 Frank DeSimone
FDOT General FDOT2010 Reference File Utilities Webinar video about FDOT2010 Reference File Utilities. 52.6 MB 0:48:13 12/08/2011 Jimmie Prow
FDOT General Merging Reference Files Webinar video about Merging Reference Files. 1.47 MB 0:01:47 02/13/2008 Matt Sexton
FDOT General GEOPAK Site GEOPAK Site Webinar training video. 93.7 MB 1:08:07 12/16/2010 Ray Filipiak
FDOT GEOPAK Drainage WMV graphic GEOPAK Drainage for FDOT Projects This webinar introduces the use of GEOPAK Drainage within the FDOT project workflow. 49.2 MB 0:42:14 07/02/2014 James Worley
FDOT GEOPAK Drainage FDOT2010 GEOPAK Drainage VBAs **Encore Production** This is an encore webinar given back in Jan 2013 covering the use of the new DrainTab and Summary of Drainage Structures VBA applications. Attendees will see how to properly set up and run these VBAs. 32.4 MB 0:18:54 07/24/2013 James Worley
FDOT GEOPAK Drainage FDOT2010 Drainage Menu Webinar video about FDOT2010 Drainage Menu. 64.6 MB 1:14:00 10/07/2011 James Worley
FDOT GEOPAK Road Plan Sheet Clipping
This webinar covers the use of GEOPAK’s Plan/Profile Sheet Composition tool to create project plan sheets. Included will be the general workflow for the tool, using the active file vs. motif files, and editing the sheet library. 83.7 MB 0:58:00 09/25/2013 Denise Broom
FDOT GEOPAK Road Borehole Navigator Borehole Navigator is the GEOPAK tool used to manage boreholes on a project and plot them to plan, profile, and (most often) cross section view. Join this webinar to see how this tool works and learn the most common issues to look for when running this tool. 100 MB 0:54:00 09/18/2013 Denise Broom
FDOT GEOPAK for Roadway Designers WMV graphic GEOPAK Project Manager Setup


Webinar video about GEOPAK Project Manager Setup. 58.1 MB 0:59:48 08/26/2010 Denise Broom
FDOT GEOPAK for Roadway Designers Adv. Course Guide
FDOT GEOPAK for Roadway Designers Roadway Designers - Adv. 1 Part 1 Webinar video about Roadway Designers - Advanced 1 Part 1. 62.5 MB 1:06:07 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Adv. 1 Part 2 Webinar video about Roadway Designers - Advanced 1 Part 2. 43.2 MB 0:49:44 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Adv. 1 Part 8 Webinar video about Roadway Designers - Advanced 1 Part 8. 19.6 MB 0:17:39 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Adv. 2 Part 1 Webinar video about Roadway Designers - Advanced 2 Part 1. 53 MB 1:02:53 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Adv. 2 Part 2 Webinar video about Roadway Designers - Advanced 2 Part 2. 40.6 MB 0:44:24 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Adv. 2 Part 3 Webinar video about Roadway Designers - Advanced 2 Part 3. 49.4 MB 0:39:14 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Adv. 2 Part 4 Webinar video about Roadway Designers - Advanced 2 Part 4. 43.5 MB 0:41:34 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Adv. 2 Part 5 Webinar video about Roadway Designers - Advanced 2 Part 5. 39.7 MB 0:43:55 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Adv. 2 Part 6 Webinar video about Roadway Designers - Advanced 2 Part 6. 55.3 MB 0:49:18 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Adv. 2 Part 7 Webinar video about Roadway Designers - Advanced 2 Part 7. 59.1 MB 0:35:29 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Adv. 2 Part 8 Webinar video about Roadway Designers - Advanced 2 Part 8. 31.8 MB 0:30:46 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Adv. Course Guide (Updated)
FDOT GEOPAK for Roadway Designers Webinar video about Digital Terrain Model Tools Ch. 1 - Digital Terrain Model Tools We will explore the DTM tools and work flow to creating the required “tin” file from delivered survey data. We will also take a look at using the Working Alignment within GEOPAK’s Project Manager as well as the Port Viewer. 91.6 MB 0:54:48 07/18/2012 Vern Danforth
FDOT GEOPAK for Roadway Designers Webinar video about Existing Ground Profiles Ch. 2 - Existing Ground Profiles We will discuss existing ground profiles and using the Draw Profile tool. 31.9 MB 0:29:00 07/25/2012 Vern Danforth
FDOT GEOPAK for Roadway Designers Webinar video about Existing Cross Sections - Part 1 Ch. 3 - Part 1 of 2 XS


We will take a look at the workflow and GEOPAK tools used to create the existing ground cross sections. This includes the Draw Pattern Line tool as well as the Draw Cross Sections tool. 40.2 MB 0:45:53 08/01/2012 Brad Eiler
FDOT GEOPAK for Roadway Designers Webinar video about Existing Cross Sections - Part 2 Ch. 3 - Part 2 of 2 XS With the existing ground cross sections cut, this webinar will look at the Draw Ancillary Features tool and using it to get existing utility information drawn onto the cross sections. 39.7 MB 0:40:32 08/08/2012 Brad Eiler
FDOT GEOPAK for Roadway Designers Webinar video about Proposed Profile And Active Chain Control Ch. 4 - Proposed Profile We will look at developing proposed profiles using the Profile Generator and the different tools that can be used to draw the profile. Active Chain Control will also be explored. 54.1 MB 0:55:11 08/15/2012 Denise Broom
FDOT GEOPAK for Roadway Designers Webinar video about Superelevation Shapes - Part 1 Ch. 5 - Part 1 of 2 Superelevation Shapes In this first part of the lesson on Superelevation Shapes, we will discuss shapes and how they are used. We will take a look at using the Automated Superelevation tool to calculate the superelevation along an alignment and then create the shapes. 58.6 MB 1:02:10 08/22/2012 Denise Broom
FDOT GEOPAK for Roadway Designers Webinar video about Superelevation Shapes - Part 2 Ch. 5 - Part 2 of 2 Superelevation Shapes We will look at the manual process to generate shapes and the available tools on the Superelevation Shape Manager toolbox. 63.1 MB 0:55:51 08/29/2012 Denise Broom
FDOT GEOPAK for Roadway Designers Webinar video about Proposed Cross Section - Part 1 Ch. 6 - Part 1 of 2 Proposed XS We will go over the proposed cross sections and criteria that was developed by the ECSO. There will be a brief overview of controlling the cross section features along with how to use the AdHoc Attribute Manager. 51.5 MB 0:59:59 09/05/2012 Denise Broom
FDOT GEOPAK for Roadway Designers Webinar video about Proposed Cross Section - Part 2 Ch. 6 - Part 2 of 2 Proposed XS We will go over the Proposed Cross Section Run dialog, how to apply the FDOT criteria and run the cross sections. 78.5 MB 1:03:47 09/12/2012 Denise Broom
FDOT GEOPAK for Roadway Designers Webinar video about Borehole Navigator Ch. 7 - Borehole Navigator We will discuss how the Borehole Navigator works and how to use it to get soil boring information into plans, cross section, profile, and plan views. 53.8 MB 0:53:18 09/19/2012 Denise Broom
FDOT GEOPAK for Roadway Designers Webinar video about Earthwork Ch. 8 - Earthwork We will look at the Earthwork tool and how to set it up to generate earthwork quantities from the cross sections. 53.7 MB 0:59:39 09/26/2012 Denise Broom
FDOT GEOPAK for Roadway Designers Webinar video about Cross Section Sheets Ch. 9 - Cross Section Sheets We will explore the options within the Cross Sections Sheet Composition Tool to clip the cross sections onto sheets. 75.6 MB 1:00:48 10/03/2012 Denise Broom
FDOT GEOPAK for Roadway Designers Webinar video about Cross Section Reports Ch. 10 - Cross Section Reports GEOPAK has many cross section reports. Join us as we take a look at some of the most commonly used reports in Florida. 43.1 MB 0:39:11 10/10/2012 Denise Broom
FDOT GEOPAK for Roadway Designers Basic Course Guide
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 1 Part 1 Webinar video about Roadway Designers - Basic 1 Part 1. 40.4 MB 0:43:35 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 1 Part 2 Webinar video about Roadway Designers - Basic 1 Part 2. 20.6 MB 0:23:34 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 1 Part 3 Webinar video about Roadway Designers - Basic 1 Part 3. 49 MB 1:00:08 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 1 Part 4 Webinar video about Roadway Designers - Basic 1 Part 4. 22.5 MB 0:23:20 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 1 Part 5 Webinar video about Roadway Designers - Basic 1 Part 5. 33.3 MB 0:37:27 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 1 Part 6 Webinar video about Roadway Designers - Basic 1 Part 6. 28.7 MB 0:34:50 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 1 Part 7 Webinar video about Roadway Designers - Basic 1 Part 7. 52.7 MB 0:55:04 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 1 Part 8 Webinar video about Roadway Designers - Basic 1 Part 8. 34 MB 0:36:17 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 2 Part 1 Webinar video about Roadway Designers - Basic 2 Part 1. 24 MB 0:30:11 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 2 Part 2 Webinar video about Roadway Designers - Basic 2 Part 2. 39.8 MB 0:44:08 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 2 Part 3 Webinar video about Roadway Designers - Basic 2 Part 3. 22.5 MB 0:26:26 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 2 Part 4 Webinar video about Roadway Designers - Basic 2 Part 4. 35.7 MB 0:35:07 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 2 Part 5 Webinar video about Roadway Designers - Basic 2 Part 5. 30.3 MB 0:36:07 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 2 Part 6 Webinar video about Roadway Designers - Basic 2 Part 6. 35.5 MB 0:42:44 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 2 Part 7 Webinar video about Roadway Designers - Basic 2 Part 7. 41.2 MB 0:45:42 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Roadway Designers - Basic 2 Part 8 Webinar video about Roadway Designers - Basic 2 Part 8. 18.3 MB 0:13:27 05/10/2012 Alvie Griffeth
FDOT GEOPAK for Roadway Designers Basic Course Guide (Updated)
FDOT GEOPAK for Roadway Designers Ch. 1 and 2 Starting a GEOPAK Project We will discuss GEOPAK Standards, File Naming Conventions, along with the Project Manager, Preferences and Road Project for starting a GEOPAK Project. 38.4 MB 0:40:52 04/25/2015 Matt Sexton
FDOT GEOPAK for Roadway Designers Ch. 3 - COGO & Horizontal - Part 1 We will discuss an introduction to the world of Coordinate Geometry commonly called COGO. 60 MB 0:40:52 05/02/2012 Vern Danforth
FDOT GEOPAK for Roadway Designers Ch. 3 - COGO & Horizontal - Part 2 We will discuss the Navigator tool, key-in COGO commands and Graphical GOGO. 49.3 MB 0:41:40 05/09/2012 Vern Danforth
FDOT GEOPAK for Roadway Designers Ch. 4 - D & C Manager - Part 1


We will discuss an introduction to the D and C Manager. 50.3 MB 0:59:30 05/16/2012 Denise Broom
FDOT GEOPAK for Roadway Designers Ch. 4 - D & C Manager - Part 2


We will discuss drawing with the D and C Manager. 54.8 MB 0:56:27 05/23/2012 Denise Broom
FDOT GEOPAK for Roadway Designers Ch. 5 - Existing Ground Profile We will discuss creating existing ground profiles with the Ground Profile and Draw Profile tools. 31.9 MB 0:29:52 05/30/2012 Vern Danforth
FDOT GEOPAK for Roadway Designers Ch. 6 - Plan View Labeler We will discuss using the Plan View Labeler to place labels with FDOT styles and create a new style file. 63.7 MB 1:02:27 06/20/2012 Denise Broom
FDOT GEOPAK for Roadway Designers Ch. 7 - Draw Cells We will discuss drawing cells and cell groups by Feature. 55.3 MB 0:43:27 06/27/2012 Brad Eiler
FDOT GEOPAK for Roadway Designers Ch. 8 - Plan And Profile Sheets We will discuss creating plan and profile sheets using the FDOT .psl file and creating Motif files. 68.9 MB 0:29:55 07/11/2012 Denise Broom
FDOT GEOPAK Survey - Data Acquisition GEOPAK Survey Introduction to GEOPAK Survey. 56.8 MB 0:58:24 02/24/2014 John Hazlip
FDOT GEOPAK Survey - Data Acquisition MicroStation Visualization of Surveying Data Webinar video about MicroStation Visualization of Surveying Data. 51.5 MB 0:45:48 02/06/2013 John Hazlip
FDOT Menu FDOTSS2 Update

Come see what’s new in FDOTSS2! This webinar will highlight the new and updated features delivered in the FDOTSS2 CADD Software. Topics include Custom Line Styles, Annotation Scale, FDOT Menu changes, LDM Summary Boxes, DDB Updates, Geographic Settings and more. 92.1 MB 0:57:16 08/28/2013 Jimmie Prow
FDOT Menu FDOT2010 Menu Review



A demonstration review of the FDOT2010 Menu. 84.3 MB 1:06:30 09/14/2011 Jimmie Prow
FDOT Menu How to configure the FDOT2010 Menu How to configure the FDOT2010 Menu. 1.95 MB 1:56:00 02/08/2011 Jimmie Prow
FDOT MicroStation Essentials Part 1
FDOT MicroStation Essentials Ch. 1 - Design Files Webinar video about Design Files. 53.8 MB 0:56:00 01/13/2012 Matt Sexton
FDOT MicroStation Essentials Ch. 8 - Changing Elements Webinar video about Changing Elements. 49.1 MB 0:55:00 02/27/2012 Jimmie Prow
FDOT MicroStation Essentials Ch. 3-5 - Viewing & Zooming, Models and Levels Webinar video about Viewing & Zooming, Models and Levels. 81.9 MB 1:06:03 02/27/2012 Jimmie Prow
FDOT MicroStation Essentials Ch. 6-7 - Basic Drawing Tools and Drawing with Precision (AccruDraw) Webinar video about Basic Drawing Tools and Drawing with Precision (AccruDraw). 85.3 MB 1:29:11 02/14/2012 Matt Sexton
FDOT MicroStation Essentials Part 2
FDOT MicroStation Essentials Ch. 1 - Drawing Annotations Webinar video about Drawing Annotations. 62.7 MB 1:05:01 05/10/2012 Jimmie Prow
FDOT MicroStation Essentials Ch. 2 - Cells and Points Webinar video about Cells and Points. 64.2 MB 0:55:10 05/10/2012 Jimmie Prow
FDOT MicroStation Essentials Ch. 3 - Patterning and Hatching Webinar video about Patterning and Hatching. 33.3 MB 1:28:47 05/10/2012 Matt Sexton
FDOT MicroStation Essentials Ch. 5 - Information and Measuring Tools Webinar video about Information and Measuring Tools. 29.5 MB 0:35:12 05/10/2012 Jimmie Prow
FDOT MicroStation Essentials Ch. 6 - Referencing Files, Raster Images and Point Clouds Webinar video about Referencing Files, Raster Images and Point Clouds. 64.7 MB 0:51:08 05/10/2012 Matt Sexton
FDOT MicroStation Essentials Ch. 7 - Printing (Part 1 of 2) Webinar video about Printing - Part 1. 56.4 MB 1:00:52 05/10/2012 Jimmie Prow
FDOT MicroStation Essentials Ch. 7 - Printing (Part 2 of 2) Webinar video about Printing - Part 2. 58.7 MB 0:57:15 05/10/2012 Jimmie Prow
FDOT Printing Printing Overview
This webinar will provide an overview of the printing capabilities available in the FDOT CADD Software Suite. This will include information about the FDOT Print Style, Pen Tables, Print Drivers and how they can be used when printing single sheets or with Print Organizer. You will also see how Sheet Navigator can be used to create Print Sets for Print Organizer. 134 MB 1:11:00 05/07/2014 Jimmie Prow
FDOT Printing FDOT2010 Plotting There are a couple of big changes to printing in MicroStation V8i. We will learn how to use a new feature called Print Styles that allows you to quickly change the look of your prints. We will also look at Print Organizer which replaces the Batch Print you currently use. 46.8 MB 0:50:12 02/21/2011 Jimmie Prow
FDOT Printing Polishing Your Prints



Customize printed output by customizing Pen Tables and Printer Configuration Files. 73.9 MB 1:04:38 11/14/2012 Jimmie Prow
FDOT Printing EDI Plot Configuration Customizing Plot Configuration in Electronic Delivery. 32.3 MB 0:04:47 06/29/2010 Matt Sexton
FDOT PEDDS PEDDS 3.6 PEDDS 3.6 Installation, Configuration and Operation. 47.4 MB 0:54:24 06/16/2011 Quinton Tillman
FDOT PEDDS PEDDS Partial Projects PEDDS Partial Projects - What every user should know. 48.9 MB 0:47:28 11/29/2012 Quinton Tillman
FDOT PEDDS PEDDS for Non-FDOT Agencies Using PEDDS to secure projects for Non-FDOT agencies. 11.7 MB 0:10:04 12/02/2010 Matt Sexton
FDOT Quality Control FDOT2010 QC Inspector QCInspector will be replacing the long used GDM QC software in FDOT2010 MR1. This webinar explains the changes to the FDOT Menu and the new methods for completing the normal QC functions. You will see how to use the new software to find errors, make exceptions and generate reports. 41.6 MB 0:33:14 07/15/2011 Jimmie Prow
FDOT Quantities / Summary Boxes Automating Signing and Pavement Marking Plans with LDM
This webinar takes a look at the workflow for generating Signing & Pavement Marking quantities. This workflow will help to speed up the process of getting our quantities from design to the Tabulation of Quantities sheets. We will be using GEOPAK’s Plan/Profile Sheet Composition tool, D&C Manager, Quantity Manager, and Linked Data Manager. 151 MB 1:19:02 06/04/2014 Denise Broom
FDOT Quantities / Summary Boxes Linked Data Manager Update
This webinar takes a look at the updates included in FDOTSS2 MR1 for Linked Data Manager and the Plan Summary Boxes. There have been fixes, enhancements, and new templates that have been automated. This is a must see webinar for anyone using Linked Data Manager and creating Plan Summary Boxes for FDOT projects. 121 MB 1:15:00 03/12/2014 Denise Broom
FDOT Quantities / Summary Boxes Do’s and Don’ts for Summary Boxes for Reviewers Learn what is and is not acceptable when reviewing a set of plan summary boxes. This webinar goes over what the designers have been taught so the reviewer can know what to expect. Included are examples of all the Plan Summary Boxes to date with explanations to commonly asked questions. 176 MB 1:45:53 01/16/2014 Denise Broom
FDOT Quantities / Summary Boxes New Quantity Summary Boxes for Structures As Comp Books are phased out with the implementation of the NEW Plan Summary Boxes, changes are being required during plans creation. Structures has their own unique specifications and requirements in this regard. Join us to explore these unique requirements in the new summary boxes, sheets and tools as they relate to the Structural side of plans creation. 153 MB 1:13:03 10/23/2013 Denise Broom
FDOT Quantities / Summary Boxes Data Sheets Update
This webinar will explain the new workflow to creating data sheets such as the Mast Arm Assemblies sheet, Soils Survey sheet, Pole Data Sheets, etc. As of the FDOT SS2 release, the old VBA to automate the population of sheet cells is no longer available. New templates and modified cells have been created. Populating these data boxes can now be automated through Linked Data Manager. 124 MB 0:57:14 09/11/2013 Denise Broom
FDOT Quantities / Summary Boxes Workflow using D&C Manager and Linked Data Manager (LDM) - Part 1 This two hour webinar will look at the workflow for generating and reporting quantities. With the Joint Bulletin released on July 22, 2014, Computation Books will be replaced with Summary Boxes in the plans. The ECSO has developed a workflow to assist in the development of these new summary boxes. This workflow has an effect on the development of the quantities from the features in the design to using a new tool within LDM to automate the population of many of the newly required summary boxes.

Note: This webinar has been broken up into 2 parts. Part 1 focuses on the creation of quantities using the D&C Manager and Quantity Manager.
99.2 MB 0:55:34 09/04/2013 Denise Broom
FDOT Quantities / Summary Boxes Workflow using D&C Manager and Linked Data Manager (LDM) - Part 2



Part 2 focuses on the new summary boxes created using Linked Data Manager and the automation function of the tool. 107 MB 1:03:20 09/04/2013 Denise Broom
FDOT Quantities / Summary Boxes Do's & Don'ts of Summary Boxes
Join us to learn what to do and NOT do when developing the new plan summary boxes that are replacing the comp book. 134 MB 1:18:04 10/16/2013 Denise Broom
FDOT Quantities / Summary Boxes Comp Book Plan Summary Box - For Reviewers & Estimators


Comp Book Plan Summary Boxes Webinar for Reviewers and Estimators. 130 MB 1:07:18 09/10/2013 Denise Broom and Melissa Hollis
FDOT Quantities / Summary Boxes Comp Book Plan Summary Boxes - For Construction


Comp Book Plan Summary Boxes Webinar for Construction. 130 MB 1:08:22 09/10/2013 Denise Broom and Richard Massey
FDOT Quantities / Summary Boxes New Quantities (Comp Book) Procedure(Revised)
As Comp Books are phased out with the implementation of the NEW Plan Summary Boxes, changes are being required during plans creation. Structures has their own unique specifications and requirements in this regard. Join us to explore these unique requirements in the new summary boxes, sheets and tools as they relate to the Structural side of plans creation. 88.6 MB 1:10:20 07/01/2013 Denise Broom
FDOT Quantities / Summary Boxes FDOT Linked Data Manager This webinar will cover the new tool from FDOT ECSO – FDOT Linked Data Manager (LDM). This is replacing the current workflow for placing & filling in content of summary boxes. LDM links the summary box & data files all at once to the design for easy updates. 74 MB 00:45:48 01/20/2013 Denise Broom
FDOT Revised Indexes Revised Index Drawing (RID)
This quick clip demonstrates how to insert a Revised Index Drawing (RID) into a project for electronic delivery As required by: ROADWAY DESIGN BULLETIN 12-16 and STRUCTURES DESIGN BULLETIN 12-13. 19.9 MB 0:12:04 09/19/2012 John Mauthner
FDOT Sheet Navigator Using FDOT Sheet Navigator
This webinar will provide a basic overview on how to use the Sheet Navigator application to auto number sheets and fill out sheet data in an FDOT project. 115 MB 00:35:33 04/09/2014 James Worley
FDOT Sheet Navigator Advanced Sheet Editing with Sheet Navigator
This webinar will provide a demonstration on the advanced sheet editing features of the Sheet Navigator application. 221 MB 00:54:27 04/16/2014 James Worley
FDOT Traffic Plans FDOT Traffic Plans - Introduction This webinar kicks off a five part series referencing the FDOT Traffic Plans training manuals. Topics covered apply to all Traffic Plans users & include FDOT CADD Standards, File Creation, Models, Annotation Scale, Traffic Plans Menu, Key Sheet & Summary of Pay Items. 16.4 MB 0:15:00 03/20/2013 Christi Holmes
FDOT Traffic Plans FDOT Traffic Plans – Pavement Marking and Signage Tools This 2nd webinar in the FDOT Traffic Plans series will explore the tools used to create a set of Pavement Marking and Signing plans. The Pavement Marking Tools covered in this webinar include layout & clipping sheets with GEOPAK, exploring Design & Computation (D & C) Manager, drawing with GEOPAK Pavement Markings Tool & plan labeling.

The Signage Tools covered in this webinar are the GEOPAK Draw Sign application & Transoft Solution's GuidSIGN Program utilized in the creation & management of signs within an FDOT Project based on the Signing & Pavement Markings Manual.
33.2 MB 0:34:58 03/27/2013 Christi Holmes
FDOT Traffic Plans FDOT Traffic Plans – Signalization Tools This 3rd webinar in the FDOT Traffic Plans series will cover the basic usage of the Signalization Tools utilized to assist the designer in the layout of Signalization Features within a FDOT Project based on the Traffic Plans Signalization Manual. 94.9 MB 1:08:00 04/03/2013 Brad Eiler
FDOT Traffic Plans FDOT Traffic Plans - Lighting Tools This 4th webinar in the Traffic Plans Webinar series will cover the basic usage of the Lighting Tools utilized to assist the designer in the layout of an Lighting Features within an FDOT Project based on the Traffic Plans Lighting Manual. 119 MB 0:58:36 04/17/2013 Brad Eiler
FDOT Traffic Plans FDOT Traffic Plans - Sheet Navigator This 5th webinar in the Traffic Plans Webinar series will overview functions & workflow of Sheet Navigator that allows the designer to manage & organize any FDOT Project sheets, including sheet editing, auto numbering & re-numbering, & labeling. 73.7 MB 0:41:00 04/24/2013 Christi Holmes
FDOT Traffic Plans FDOT Drawsign This webinar in the FDOT Traffic Plans series will cover the GEOPAK Draw Sign application utilized in the creation of sign post assemblies & management of signs within an FDOT Project in an interactive, production style workflow based on the Signing & Pavement Markings Manual. 103 MB 1:12:29 12/08/2010 FDOT ECSO
Transoft Solutions AutoTURN
This webinar covers the AUTOTURN basics, placing templates, tracking a vehicle through its turning movement, including driving a truck forwards and backwards, and placing all of your visual data for a simplified report. 178 MB 0:57:49 04/30/2014 Guy Snead
Transoft Solutions Guide Sign 6.0
This webinar will provide basic and advanced users instruction on creating signs using the Guide Sign 6.0. We will start with functions of the program and then using tips and tricks we will create multiple types of signs. Finally we will place sheet borders and text using the Guide Sign program. 155 MB 01:31:50 04/24/2014 Michael Blakley

FDOT Autodesk

This is a list of recorded FDOT Autodesk webinar sessions made available by the Engineering CADD System Office.

Category Title Description Size Duration Pres. Date Presenter
FDOT General WMV graphic FDOT C3D DGN to DWG Conversion

This webinar will covers the exchange of geometric and CAD data between the Bentley and Autodesk platforms, tips for Drawing conversion, options and techniques to maintain drawing fidelity and standards across both platforms. Also demonstrated is how to exchange design data between platforms with losing minimal intelligence in the translation. 62.8 MB 0:40:56 09/23/2014 Mike Racca
FDOT General FDOT Mailer Contact Management
This quick clip demonstrates how to sign up for the FDOT Mailer Contacts Database. Sign up for the FDOT Mailer to receive information regarding upcoming webinars, training opportunity and other topics of interest. 3.20 MB 0:03:44 02/13/2008 Matt Sexton
FDOT Printing and Plan Production FDOT C3D Plan Prod. Tools - Part 1
This Webinar will cover all necessary Civil 3D processes required to use AutoCAD Civil 3D Plan Production tools that are utilized in the FDOT Plans workflows such as how to create Data References, View Frames, Sample lines, Profile and Section Views and Plan Production output wizards. 93.9 MB 0:43:27 11/05/2013 Mike Racca
FDOT Printing and Plan Production FDOT C3D Plan Prod. Tools - Part 2
This webinar will cover all necessary Civil 3D processes required to use AutoCAD Civil 3D Plan Production tools that are utilized in the FDOT Plans workflows such as how to create Data References, View Frames, Sample lines, Profile and Section Views and Plan Production output wizards. 89.6 MB 00:36:00 01/22/2014 Mike Racca
FDOT Quantities / Summary Boxes WMV graphic FDOT C3D Plan Quantities

This webinar highlights the enhancements to the FDOT Entity Manager application, and introduce the FDOT Quantity Takeoff Manager. Demonstrated are the functionalities of the Automated Summary Tables and how to extract and manipulate data for other tables. This webinar also covers AutoCAD Tables, and how to dynamically link them to Excel using AutoCAD’s DLM (Data Link Manager). 105 MB 0:37:25 09/16/2014 Randy Roberts
FDOT Survey zip file graphic FDOT Survey Webinars Dataset FDOT Survey Webinar series Dataset. 1.73 MB --- --- ---
FDOT Survey WMV graphic FDOT C3D DB Point & Figure Grouping Session 1 of 4; This first session will introduce the Civil 3D Survey Database, point and figure grouping concepts, the FDOT Land XML Grouper, visualization and point object label styles. 104 MB 0:44:53 10/29/2013 John Hazlip
FDOT Survey WMV graphic FDOT C3D Surf. & Align. - Pt 2 of 4 Session 2 of 4; This session will introduce Surface and Alignment format concepts for Civil 3D, various ways to build surfaces, alignments, & and styles for visualization. 82.7 MB 0:34:33 01/28/2013 John Hazlip
FDOT Survey WMV graphic FDOT C3D Survey Deliverables - Pt 3 of 4

This webinar will show how to build FDOT compliant survey deliverables from the Civil 3D database, from surfaces, and alignments developed in a Civil 3D DWG file. 68 MB 0:37:13 09/30/2014 John Hazlip
FDOT Survey WMV graphic FDOT C3D CTLSRD & SSM - Pt 4 of 4 This webinar will introduce the Sheet Set Manager which is necessary for building a FDOT compliant CTLSRD.DWG, project network control sheet. 53.8 MB 0:33:35 10/07/2014 John Hazlip
FDOT Roadway WMV graphic Existing Features Subassembly

This Webinar demonstrates tools and processes used to document existing features prior to design model creation; FDOT Existing Conditions subassembly, and existing ground Cross Sections. 71.1 MB 0:40:25 10/21/2014 Mike Racca
FDOT Traffic Plans WMV graphic FDOT C3D 2015 Sign Tool

This webinar demonstrates using the FDOT Sign Tool located on the FDOT Ribbon to produce Signing & Pavement Marking Plans, will show Editing Techniques and Labeling. 70.4 MB 0:39:24 10/15/2014 Randy Roberts
FDOT Traffic Plans WMV graphic FDOT C3D Pavement Marking Tools This webinar demonstrates using the FDOT Sign Tool located on the FDOT Ribbon to produce Signing & Pavement Marking Plans, will show Editing Techniques and Labeling. 103 MB 0:48:16 10/15/2013 Randy Roberts