Permanent Retaining Wall - Cantilever Retaining Wall

PERMANENT RETAINING WALL - CANTILEVER RETAINING WALL

AASHTO LRFD Bridge Design Specifications

FDOT Structures Design Guidelines

Plans Preparation Manual English (Volume I)

Plans Preparation Manual English (Volume II)

FDOT Structures Design Office Engineering Programs

FDOT Design Standards

Soils and Foundation Handbook

Standard Specifications for Road and Bridge Construction

AASHTO LRFD Bridge Design Specifications
3.11.1	General
3.11.2	Compaction
3.11.3	Presence of Water
3.11.5	Earth Pressure
3.11.6	Surcharge Loads: ES and LS
11.4	Soil Properties and Materials
11.5	Limit States and Resistance Factors
11.6	Abutments and Conventional Retaining Walls

FDOT Structures Design Guidelines
3.12.1	Conventional Cast-in-Place Walls
3.12.2	Pile Supported Walls
3.12.12	Permanent Temporary Wall Combination
3.13	Retaining Wall Design

Plans Preparation Manual – English (Volume I)
16.3.3	Other Structural Submittals and Reviews
26.9.2.11	BDR /30% Structures Plans- Retaining Wall Study
26.9.9.5	BDR - 30% Submittals - Retaining Walls
26.10.11	BDR Submittal Checklist - Retaining Wall and Bulkhead Requirement
26	BDR - Exhibit 26-A – Submittal Checklist
30	Retaining Walls

For current Plans Preparation Manual: http://www.dot.state.fl.us/rddesign/PPMManual/PPM.htm

Plans Preparation Manual English (Volume II)
22.3	Retaining Walls (Cast in Place, Proprietary, Temporary)
22	Exhibits -MSE Wall Example Plans
For current Plans Preparation Manual: http://www.dot.state.fl.us/rddesign/PPMManual/PPM.htm

FDOT Structures Design Office Engineering Programs

LRFD Retaining Wall Program

FDOT Design Standards
5300	Permanent Retaining Wall Systems
5301	Temporary Retaining Walls Systems
For current Design Standards: http://www.dot.state.fl.us/rddesign/DesignStandards/Standards.htm

FDOT Structures Data Tables (Microstation cells)
5100	Retaining Walls Data Table
5300	Retaining Walls - Permanent Data Table
5301	Retaining Walls - Temporary Data Table
For the current Microstation Cells: http://www.dot.state.fl.us/structures/CADD/standards/standards.htm

Soils and Foundation Handbook 2000 Edition
3.2.2.3	Retaining Walls
8.5	Retaining Wall Design
9.2.7	Retaining Wall and Seawalls
Table 2	Geotechnical Engineering Analysis Required for Embankments, Cut Slopes, Structure Foundations and Retaining Walls (After FHWA, 1985)

Standard Specifications for Road and Bridge Construction
400	Concrete Structures
415	Reinforcing Steel
548	Retaining Wall Systems
For current specifications: http://www.dot.state.fl.us/specificationsoffice