AASHTO LRFD Bridge Design Specifications

6.1

Scope

AASHTO Standard Specification for Highway Bridges

Sect 3

Loads

Sect 10

Structural Steel

AASHTO Guide Specifications for Horizontally Curved Highway Bridges

Part I

Allowable Stress Design Criteria for Curved Composite Box Girder Bridges

Part II

Load Factor Design – Curved Composite Box Girder Bridges

AASHTO Manual for Condition Evaluation of Bridges

3.8.3.1

 Procedures – Superstructure - Steel Beams, Girders and Box Sections

6.3

Rating Levels

6.4

Rating Methods

6.6.3.1

Nominal Capacity – Load Factor Method – Structural Steel

6.7

Loadings

FDOT Structures Design Guidelines

1.2

Criteria for Deflection & Span-to-Depth Ratios

2.2

Dead Loads

2.5

Miscellaneous Loads

5.1

General

5.2

Dead Load Camber

5.3

Structural Steel

5.4

Bolts

5.5

Minimum Steel Dimensions

5.7

Diaphragms and Cross Frames for “I-Girders”

5.8

Transverse Intermediate Stiffeners

5.9

Bearing Stiffeners

5.10

Longitudinal Stiffeners

5.11

Connections and Splices

5.12

Corrosion Protection

7.3

Analysis and Design

7.4

Attachment of Widening to Existing Structure

7.8

Bridge Widening Rules

Chap. 9

Bridge Cost Estimating

Plans Preparation Manual – English (Volume I)

Chap 26

 Bridge Project Development

For current Plans Preparation Manual:  http://www.dot.state.fl.us/rddesign/PPMManual/PPM.htm

Standard Specifications for Road and Bridge Construction

Section 460

 Structural Steel and Miscellaneous Metals

Section 502

 Shear Connectors

Section 962

 Steel and other Ferrous Metals and Metal Items

For current Specifications:  http://www.dot.state.fl.us/specificationsoffice/